Single Sign-On with Kerberos

For Subscription editions only.

{description.} It assumes you already have a Correctly configured Windows Domain (AD/KDC/DNS services).

This information applies to a Bonita platform deployed from a bundle, not to the Engine launched from Bonita Studio. <BUNDLE_HOME> refers to the root directory of the bundle.

Kerberos configuration is at tenant level. Each tenant can use a different authentication method (over Kerberos or not).

Bonita uses Spnego library that allows to request tickets using the Kerberos protocol.

Kerberos single sign-on with Active Directory (AD)

Kerberos SSO with AD relies on a minimum on 3 physical machines that are member of the same AD domain:

Kerberos with AD

Domain Controller: the AD domain controller providing the SSO tickets through the Kerberos KDC component.
Service Server: the server on which resides the service we want to access (Bonita for instance). This server is referred to as the "Principal". It uses the credentials of an AD service account and is member of the domain.
Client: the client is the end user’s machine. The client is referred to as the "Subject". It uses the credentials of an AD user account and is member of the domain.

Kerberos overview for Bonita

The target architecture for integrating Kerberos SSO with Bonita and Spnego will involve a custom web application filter: Bonita Kerberos filter.

Authentication over Kerberos

The scenario covered by the filter is the following:

The Bonita Kerberos filter intercepts all the requests to Bonita Application pages, and checks if the user is already logged in on Bonita
- If already logged in => Allow the access
- If not logged in => The request is transferred to the Spnego authenticator

The Spnego authenticator will then verify the user’s Kerberos tickets if present or create a new one. After obtaining a valid ticket the filter will store some information (the authenticated user login) in the client request and get back to the Bonita Kerberos filter.

The Bonita Kerberos filter will automatically create a Bonita session and let the user access the Bonita Application resources.

Bonita "username" should match the authenticated user login returned in the client response.
You can configure Bonita engine to create the accounts on the fly in the database when a user accessing Bonita is already authenticated with Kerberos (see the configuration of bonita-tenant-sp-custom.properties in the 6th section of the chapter "Configure Bonita Bundle for Kerberos").

Pre-installation Environment Checks

In this section, we will describe the minimal set of configuration checks that must be performed before starting the installation on windows.

Domain Membership Checks

Make sure that the Service Server AND the Client machines are member of the same AD Domain.

Service Principal Setup

The Windows service that will be connected with SSO needs to be associated with a Principal in the form of an AD service account. This account is called the Service Principal Name (SPN). Note that this a different account than the machine object on which the service is running.

1- Obtain from your AD administrator the AD service account that is going to be used as the SPN. If none exist yet, follow the steps below else, ignore this.

2- Check that the service account is not already associated to any host by running this command (replace bonita.tomcat with your service account name):

setspn -L bonita.tomcat

This will list the hosts associated to this service account. There should not be any entry.

3- Run these two commands in order to declare the SPN (bonita.tomcat). The first command will use the simple host name (win2008tomcat):

setspn -A HTTP/win2008tomcat bonita.tomcat

Registering ServicePrincipalNames for CN=Bonita Tomcat,OU=Service Accounts,OU=Grenoble,OU=Bonitasoft,DC=corp,DC=bonitasoft,DC=com
		HTTP/win2008tomcat
Updated object

Second command with the fully qualified host name (win2008tomcat.corp.bonitasoft.com):

setspn -A HTTP/win2008tomcat.corp.bonitasoft.com bonita.tomcat

Registering ServicePrincipalNames for CN=Bonita Tomcat,OU=Service Accounts,OU=Grenoble,OU=Bonitasoft,DC=corp,DC=bonitasoft,DC=com
        HTTP/win2008tomcat.corp.bonitasoft.com
Updated object

4- Make sure the SPN is set up correctly by running this command:

setspn -L bonita.tomcat

Registered ServicePrincipalNames for CN=Bonita Tomcat,OU=Service Accounts,OU=Grenoble,OU=Bonitasoft,DC=corp,DC=bonitasoft,DC=com:
        HTTP/win2008tomcat.corp.bonitasoft.com
        HTTP/win2008tomcat

5- In Active directory, open the service account user properties and go to the account tab. Flag the following values:

Password never expires = true
User cannot change password = true
This account supports Kerberos AES128
This account supports Kerberos AES256
Use Kerberos DES encryption types for this account = should preferably be false

6- Still in the service account user properties, go to the delegation tab and set the following value to true:

Trust this user for delegation to any service (Kerberos only).

Configure Bonita Bundle for Kerberos

You need to execute the following actions in the folder of each tenant for which you want to support authentication over Kerberos. If you want this configuration to also apply to each tenant created later, make sure to also perform those actions in the template tenant configuration folder: <BUNDLE_HOME>/setup/platform_conf/current/tenant_template_* (if you have not started the Bonita bundle yet, the files are located in <BUNDLE_HOME>/setup/platform_conf/initial/tenant_template_*)

The bundle already contains the files needed to use Kerberos with Bonita platform.
To configure Bonita for Kerberos:

If you do not already have one:
1. Download a Subscription edition bundle from the customer portal
2. Configure it as needed
3. Run it a first time, so that the first default tenant is created (TENANT_ID = 1)
4. Stop it before modifying the configuration files below
You will need to edit the Kerberos configuration file in order to select the desired encryption types used to secure the communication. In the following folder <BUNDLE_HOME>/server/conf, edit the krb5.conf file as follows:
```
 [libdefaults]
		default_realm = BONITA.LOCAL
     default_tkt_enctypes = aes256-cts-hmac-sha1-96 aes128-cts rc4-hmac des3-cbc-sha1 des-cbc-md5 des-cbc-crc
     default_tgs_enctypes = aes256-cts-hmac-sha1-96 aes128-cts rc4-hmac des3-cbc-sha1 des-cbc-md5 des-cbc-crc
     permitted_enctypes   = aes256-cts-hmac-sha1-96 aes128-cts rc4-hmac des3-cbc-sha1 des-cbc-md5 des-cbc-crc

 [realms]
BONITA.LOCAL  = {
     kdc = DC.bonita.local
     			default_domain = BONITA.LOCAL
     }

 [domain_realm]
.BONITA.LOCAL = BONITA.LOCAL
```
If you want to use the AES256-CTS encryption type, you need to update the Java security libraries (Java Cryptography Extension (JCE) Unlimited Strength) to those for Strong Encryption. Depending on your java version, you might have to download some extra files or not.+
- For Java updates > Java 8 u162 and java 9, the unlimited policy is enabled by default. You no longer need to install the policy file in the JRE or set the security property crypto.policy
- For Java updates < Java 8 u162, you have to download the security libraries here. These libraries need to be put in jre/lib/security and jdk/jre/lib/security.
In the following folder <BUNDLE_HOME>/server/conf, edit the login.conf file as follows:
```
 spnego-client {
     com.sun.security.auth.module.Krb5LoginModule required;
 };

 spnego-server {
     com.sun.security.auth.module.Krb5LoginModule required
     storeKey=true
     isInitiator=false;
 };
```
In addition, the system property java.security.auth.login.config should not already be set or, if it is, it should target the file conf/login.conf. In order to do that, you can edit the file <BUNDLE_HOME>/server/bin/setenv.sh (.bat) and set the SECURITY_OPT variable as follows:
SECURITY_OPTS="-Djava.security.auth.login.config=${CATALINA_HOME}/conf/login.conf"
In the tenant_portal folder of each existing tenant: <BUNDLE_HOME>/setup/platform_conf/current/tenants/<TENANT_ID>/tenant_portal, edit the authenticationManager-config.properties as follows:
```
     # saml.logout.global = false
     # auth.tenant.admin.username = install
     # auth.passphrase = BonitaBPM

 -->	auth.AuthenticationManager = org.bonitasoft.console.common.server.auth.impl.kerberos.RemoteAuthenticationManagerImpl
 -->	kerberos.filter.active = true
 -->	kerberos.auth.standard.allowed = false
 -->	auth.tenant.admin.username = install
 -->	auth.tenant.standard.whitelist = william.jobs
 -->	auth.passphrase = Bonita

     # auth.AuthenticationManager = org.bonitasoft.console.common.server.auth.impl.oauth.OAuthAuthenticationManagerImpl
     # OAuth.serviceProvider = LinkedIn
     # OAuth.consumerKey = ove2vcdjptar
     (...)
     -->	logout.link.hidden=true
```
Make sure to set the right tenant admin username. It is recommended to also replace the value of the passphrase (property auth.passphrase) which is used by the engine to verify the authentication request. The value must be the same as in the file bonita-tenant-sp-custom.properties.
If the users need to bypass kerberos authentication method, you can authorize it by setting the property kerberos.auth.standard.allowed to true. Users will then be able to log in using the Bonita Login page (/login.jsp) provided they have a Bonita account and their password is different from their username.
If only a limited group of users need to bypass kerberos authentication method you can restrain it by setting the property kerberos.auth.standard.allowed to false and setting the property auth.tenant.standard.whitelist with the list of authorized usernames (comma separated).
In the tenant_portal folder of each existing tenant: <BUNDLE_HOME>/setup/platform_conf/current/tenants/<TENANT_ID>/tenant_portal, edit the spnego-config.properties file as follows:
```
 spnego.allow.basic          = true
 spnego.allow.localhost      = true
 spnego.allow.unsecure.basic = true
 spnego.login.client.module  = spnego-client
 spnego.krb5.conf            = conf/krb5.conf
 spnego.login.conf           = conf/login.conf
 spnego.login.server.module  = spnego-server
 spnego.prompt.ntlm          = true
 spnego.logger.level         = 1
 spnego.preauth.username     = <username>
 spnego.preauth.password     = <password>
```
username and password should be replaced with the domain account and password to use to pre-authenticate to on the Domain controller acting as Kerberos Key Distribution Center.
spnego.login.client.module and spnego.login.server.module property values should match the login contexts set in login.conf (spnego-client and spnego-server by default).

Make sure to set your principal user name and password.

In the tenant_engine folder of each existing tenant: <BUNDLE_HOME>/setup/platform_conf/current/tenants/<TENANT_ID>/tenant_engine/ edit the file bonita-tenant-sp-custom.properties as follows:

# Authentication service to use. Some are natively provided:
# authenticationService
#   * binded to bonita authentication mode
#   * impl: org.bonitasoft.engine.authentication.impl.AuthenticationServiceImpl
# jaasAuthenticationService
#   * to use JAAS
#   * impl: com.bonitasoft.engine.authentication.impl.JAASGenericAuthenticationServiceImpl
#   * this is the one to configure SSO over CAS (CAS properties to be defined hereafter
# noAuthenticationService
#   * does no authentication on the engine side
#   * impl: com.bonitasoft.engine.authentication.impl.NoAuthenticationServiceImpl
# passphraseOrPasswordAuthenticationService
#   * Used by SAML2 and Kerberos implementations, login only if a passphrase is valid, or if a username/password is valid.
#   * Requires PassphraseOrPasswordAuthenticationService bean to be uncommented in bonita-tenant-sp-custom.xml
#   * impl: com.bonitasoft.engine.authentication.impl.PassphraseOrPasswordAuthenticationService
# you can provide your own implementation in bonita-tenant-sp-custom.xml and refer to the bean name of your choice
authentication.service.ref.name=passphraseOrPasswordAuthenticationService

# If authentication.service.ref.name equals "passphraseOrPasswordAuthenticationService",
# you need to configure the following passphrase
authentication.service.ref.passphrase=BonitaBPM

# Create users on the fly, when they are missing from bonita but authenticated by the SSO. The user will belong to the group and role specified below.
#authentication.passphraseOrPasswordAuthenticationService.createMissingUser.enable=true
#authentication.passphraseOrPasswordAuthenticationService.createMissingUser.defaultMembershipGroupPath=/acme/hr
#authentication.passphraseOrPasswordAuthenticationService.createMissingUser.defaultMembershipRoleName=member

# CAS authentication delegate : enables the user, providing login/password,
# to be logged in automatically against CAS web application
# To be used in conjunction with the generic authentication service configured with CAS (jaasAuthenticationService)
#authenticator.delegate=casAuthenticatorDelegate
#authentication.delegate.cas.server.url.prefix=http://ip_address:port
#authentication.delegate.cas.service.url=http://ip_address:port/bonita/loginservice

It is recommended to also replace the value of the passphrase (property auth.passphrase). The value must be the same as in the file authenticationManager-config.properties updated previously.

If you want Bonita engine to create the accounts on the fly when a user accessing Bonita is already authenticated with Kerberos, you can uncomment the property authentication.passphraseOrPasswordAuthenticationService.createMissingUser.enable (and set its value to true) as well as the next 2 properties to add a default membership to each user account:

authentication.passphraseOrPasswordAuthenticationService.createMissingUser.defaultMembershipGroupPath specify the group in which every user account created on the fly will be added (the full group path is needed)
authentication.passphraseOrPasswordAuthenticationService.createMissingUser.defaultMembershipRoleName specify the role to use to create the membership

Activating this option means any user logged in on the domain trying to access Bonita will have an account created automatically in Bonita Database.

Confirm that your Domain Controller is correctly configured.
Then you can start the bundle and try to access any Bonita Application page, an app page or a form URL (or just http ://<host>:<port>/bonita[?tenant=<tenantId>]) and make sure that you are automatically logged in.

Note that if you try to access http ://<bundle host>:<port>/bonita/login.jsp, then you won’t be redirected as this page still needs to be accessible in order for the tenant administrator (or another user if you set the property kerberos.auth.standard.allowed to true or define a whitelist with the property auth.tenant.standard.whitelist) to be able to log in without an account on AD.

Logout behavior

The most commonly used solution is to hide the logout button from the Bonita Layout. Users are logged in as long as they don’t close their web browser and their session does not time out.
To do this, set the logout.link.hidden option to true in authenticationManager-config.properties located in <BUNDLE_HOME>/setup/platform_conf/initial/tenant_template_portal for not initialized platform or <BUNDLE_HOME>/setup/platform_conf/current/tenant_template_portal and <BUNDLE_HOME>/setup/platform_conf/current/tenants/[TENANT_ID]/tenant_portal/.

Troubleshooting

To troubleshoot Kerberos SSO login issues, you need to add a logging handler for the package net.sourceforge.spnego and increase the log level to ALL for the packages org.bonitasoft, com.bonitasoft, and net.sourceforge.spnego in order for errors to be displayed in the log files bonita-*.log (by default, they are not).

In order to do that in a Tomcat bundle, you need to edit the file `<BUNDLE_HOME>/server/conf/logging.properties.

Add the lines:

net.sourceforge.spnego.handlers = 5bonita.org.apache.juli.AsyncFileHandler
net.sourceforge.spnego.level = ALL

Update the existing lines (to set the level to ALL):

org.bonitasoft.console.common.server.auth.level = ALL
org.bonitasoft.engine.authentication.level = ALL
com.bonitasoft.engine.authentication.level = ALL

Edit the logger tags which category matches org.bonitasoft.console.common.server.auth, org.bonitasoft.engine.authentication and com.bonitasoft.engine.authentication packages: change the level name attribute of each logger to ALL and add a new logger with the category net.sourceforge.spnego (also with a level name set to ALL).

In the logs, you may get a IllegalArgumentException in the class net.sourceforge.spnego.SpnegoFilterConfig.
The most probable cause for that is that the login contexts (set in login.conf, spnego-client and spnego-server by default) do not match the values of the properties spnego.login.client.module and spnego.login.server.module set in the file spnego-config.properties.
You may also see a NullPointerException in the class net.sourceforge.spnego.SpnegoFilterConfig
In that case, for Tomcat, you should make sure the properties spnego.krb5.conf and spnego.login.conf of spnego-config.properties target the right files (the path is relative to <BUNDLE_HOME>/server) and the system property java.security.auth.login.config should not be set or, if it is, it should target the file conf/login.conf.

Manage passwords

When your Bonita platform is configured to manage authentication over Kerberos, the users passwords are managed in your AD.
However, when you create a user in the Bonita Administrator Application, specifying a password is mandatory. This password is ignored when logging in with Kerberos.

LDAP synchronizer and Kerberos

If you are using an LDAP (or AD) service and the LDAP synchronizer to manage your user data,
you can continue to do this and manage authentication over Kerberos.
The LDAP synchronizer user must be registered in Bonita (no need for an LDAP/AD account). It is recommended though to use the tenant admin account.
We recommend that you use LDAP or AD as your master source for information, synchronizing the relevant information with your Bonita platform.

By default the LDAP synchronizer sets the password of the accounts created with the same value as the username. So, even if you allow standard authentication (by setting the property kerberos.auth.standard.allowed in authenticationManager-config.properties ), users won’t be able to log in with the Bonita login page directly without going through the Domain Controller.

Single sign-on with Kerberos using the REST API

Only resources that require a direct access from a web browser are handled by the Kerberos filter. Access to other resources won’t trigger a Kerberos authentication process. Here is the subset of resources filtered by the Kerberos filter by default:

/portal/homepage
/portal/resource/*
/portal/form/*
/mobile/*
/apps/*

REST API are not part of them by default, but if a HTTP session already exists thanks to cookies, REST API can be used.

The recommended way to authenticate to Bonita Portal to use the REST API is to use the login service.
If you need the SSO to work with the APIs you can update the web.xml of bonita.war to add the following resources to the URL Mappings of AuthenticationFilter and KerberosFilter:

    <url-pattern>/API/*</url-pattern>