LDAP authentication configuration

Bonita can be configured to perform user authentication against an LDAP server such as Active Directory, Apache Directory Server, or OpenLDAP.

For Subscription editions only.

Important notes:

This documentation applies to an existing and working Bonita installation (see the installation instructions).
In order to have functioning Active Directory/LDAP authentication, the user login (username) must exist both in the LDAP directory and in the Bonita database (user password is checked against the LDAP server but user information is read from Bonita database). We recommend that you use the LDAP synchronizer to create Bonita users in a Bonita database.

Overview

This type of configuration relies on a specific implementation of the Bonita Engine authentication service that delegates the actual user name and password verification to a JAAS service configured with an LDAP specific Login Module.

Before you start

In order to configure LDAP successfully, make sure you have the following information:

LDAP server type: Active Directory (AD), Apache Directory Server, or OpenLDAP
LDAP server address
LDAP listening port (e.g. 389 by default)
Is it possible to build the user distinguished name with user name that the user specifies when logging in?
For example, if the user name is: john.smith and the user DN is: CN=John Smith,CN=Users,DC=MyDomain,DC=com, it’s not possible to build the DN dynamically. But it’s possible to do so if the DN is: uid=john.smith,ou=people,dc=example,dc=com.
If it’s not possible to build the DN using the user name you will need the following extra information:
- The DN of the LDAP entry under which all users are located (e.g. CN=Users,DC=MyDomain,DC=com)
- The user entry objectClass (the most restrictive one). E.g. usually user on AD, inetOrgPerson or organizationalPerson for other LDAP servers.
- The user entry attribute used for authentication (e.g. userPrincipalName on AD, value: john.smith@mydomain.com or uid on other LDAP servers, value: john.smith)
Does the LDAP server allow anonymous search?
Does the LDAP server allow search for all users that can possibly log in?
If search can only be performed by a limited number of "technical" accounts you will need the user name and password of such an account.
If SSL security is required, ldaps server address FQDN, port and the certificate if provided

Create a JAAS configuration file

This section explains how to put together all the LDAP server information you have to create or edit a JAAS configuration file compatible with your JEE application server.

Login context name

The JAAS configuration can include one or several login contexts. The Bonita login context must be named BonitaAuthentication-<TENANT_ID> (where <TENANT_ID> is your tenant id).

LdapLoginModule attributes to set

It’s important to identify which LdapLoginModule attributes you need to set. This will be at least one of authIdentity, userFilter, tryFirstPass, java.naming.security.principal or java.naming.security.credentials. Based on the information described in the "Before you start" section, you can identify which of the following cases applies:

If you can build the user DN by directly injecting the user name => set only the authIdentity attribute
If you cannot build the DN and anonymous search is allowed => set only the userFilter attribute
If you cannot build the DN and anonymous search is disallowed and authenticated users can search => set the userFilter and authIdentity attributes
If you cannot build the DN and anonymous search is disallowed and authenticated users cannot search => set the userFilter, authIdentity, tryFirstPass, java.naming.security.principal and java.naming.security.credentials attributes

Values for LdapLoginModule attributes

In this section we explain how to set LdapLoginModule attributes values. (For further information, check the LdapLoginModule javadoc page.)

userProvider: set this to ldap://<ldap server address>:<ldap server port>/<DN of the LDAP entry under which all users are located>.

Spaces in the distinguished name (DN) component of the URL must be escaped using the standard mechanism of percent character ('%') followed by two hexadecimal digits: replace them with '%20'. Query components must also be omitted from the URL.

For example, if your users are under CN=Bonita Users,DC=MyDomain,DC=com: ldap://localhost:389/CN=Bonita%20Users,DC=MyDomain,DC=com

userFilter (only if needed): the value must be a search request that will find your users in the LDAP server. The search request can be for example: (&(objectClass=user)(userPrincipalName={USERNAME}@mydomain.com)). Use an LDAP tool (such as Apache Directory Studio) to validate that the request returns the expected result if you replace {USERNAME} with an actual username.

authIdentity (only if needed): there are two cases:
If you can build the user DN, set the attribute value with the user DN and {USERNAME} tag. For example uid={USERNAME},ou=users,dc=example,dc=com.
If you use a userFilter and users are allowed to search, set the value with {USERNAME}@mydomain.com for AD and user the DN (same as above) for other LDAP servers.

tryFirstPass
(only if needed): set this to true.

java.naming.security.principal
(only if needed): specify the username (AD) or the user DN (other LDAP servers) of a user that can perform searches on the server.

java.naming.security.credentials
(only if needed): specify the password of a user that can perform searches on the server.

useSSL Set this to true if SSL is required, false otherwise.

Create or edit the configuration file for your application server

All configuration files are case sensitive. You can find more examples in the JAAS configuration files examples section of this page.

The JAAS configuration file follows the default JVM syntax.
Here is an example of JAAS configuration file:

BonitaAuthentication-1 {
  com.sun.security.auth.module.LdapLoginModule sufficient
  userProvider="ldap://localhost:389/ou=people,dc=example,dc=com"
  authIdentity="uid={USERNAME},ou=people,dc=example,dc=com"
  useSSL=false;
};

We recommend that you name your JAAS configuration file jaas.cfg and that you add the file under <BUNDLE_HOME>/server/conf folder.

Configuration steps

Changing Bonita authentication service

The default Bonita installation comes with an authentication service implementation based on the Bonita Engine database. In order to activate Active Directory/LDAP authentication the service implementation needs to be changed. To do this, edit bonita-tenant-sp-custom.properties.

You will need to perform following changes:

Comment out the authenticationService line
Add this new line: authentication.service.ref.name=jaasAuthenticationService

Configure JAAS

To define the JAAS configuration file location you need to set a JVM property, java.security.auth.login.config. If you’re using a custom deployment into existing Tomcat installation, you need to edit the setenv script provided with Bonita and located in <BUNDLE_HOME>/server/bin folder. If you’re using the tomcat bundle installation, you need to edit the setenv script provided with Bonita and located in <BUNDLE_HOME>/setup/tomcat-templates folder.

For Linux and Mac OS

Edit this file: <BUNDLE_HOME>/setup/tomcat-templates/setenv.sh
Locate the line that starts: #SECURITY_OPTS
Uncomment this line, i.e. remove the # sign and set property value to: ${CATALINA_HOME}/conf/jaas.cfg
Locate the line that starts: CATALINA_OPTS=
Add the tag ${SECURITY_OPTS} after the tag ${PLATFORM_SETUP}

For Windows

Edit this file: <BUNDLE_HOME>/setup/tomcat-templates/setenv.bat
Locate the line that starts: rem set SECURITY_OPTS
Uncomment it, i.e. remove "rem" keyword and set property value to: %CATALINA_HOME%\conf\jaas.cfg
Locate the line that starts: set CATALINA_OPTS=
Add the tag %SECURITY_OPTS% after the tag %PLATFORM_SETUP%

Configure SSL (optional)

It’s possible to allow authentication to ldap over SSL (ldaps). First of all in the <BUNDLE_HOME>/server/conf/jaas.cfg file you should use ldaps FQDN and port, and set useSSL to true. Then the following operations are required:

Create the keystore

You should have a certificate from the ldaps server (i.e. certificate.pem).

Create the following folder: ${CATALINA_HOME}/conf/SSL.
Put the certificate.pem file into this folder.
Move to this directory and create a keystore with the keytool command (keytool is part of JDK):
```
keytool -importcert  -alias yourAlisaName -file certificate.pem -keystore certificateStore.jks
```
Choose a password for your keystore (here we call it keyStorePassword)
Answer to the questions and at the end verify that the truststore (i.e. certificateStore.jks) has been created correctly

Share the truststore with Tomcat

Edit this file: <BUNDLE_HOME>/setup/tomcat-templates/setenv.sh (Linux) or <BUNDLE_HOME>/setup/tomcat-templates/setenv.bat (Windows)

Add the following line after the one that starts with set SECURITY_OPTS:

Linux: SSL_OPTS="-Djavax.net.ssl.trustStore=pathToTruststore -Djavax.net.ssl.trustStorePassword=keyStorePassword"
Windows: set SSL_OPTS="-Djavax.net.ssl.trustStore=pathToTruststore -Djavax.net.ssl.trustStorePassword=keyStorePassword"

Replace the pathToTruststore and keyStorePassword with the proper values
Locate the line that starts with CATALINA_OPTS (Linux) or set CATALINA_OPTS (Windows)
(Linux) Add the tag ${SSL_OPTS} after the tag ${INCIDENT_LOG_DIR}
(Windows) Add the tag %SSL_OPTS% after the tag %INCIDENT_LOG_DIR%

JAAS configuration files examples

Remember to remove the debug flag for production.

These examples use the JAAS standard syntax (as used by Tomcat).

Active Directory

Search allowed for all users

In this example, the user name is john.smith:

BonitaAuthentication-1 {
  com.sun.security.auth.module.LdapLoginModule sufficient
  userProvider="ldap://localhost:389/CN=Users,DC=MyDomain,DC=com"
  userFilter="(&(objectClass=user)(userPrincipalName={USERNAME}@mydomain.com))"
  authIdentity="{USERNAME}@mydomain.com"
  debug=true
  useSSL=false;
};

In this example, the user name is john.smith@mydomain.com:

BonitaAuthentication-1 {
  com.sun.security.auth.module.LdapLoginModule sufficient
  userProvider="ldap://localhost:389/CN=Users,DC=MyDomain,DC=com"
  userFilter="(&(objectClass=user)(userPrincipalName={USERNAME}))"
  authIdentity="{USERNAME}"
  debug=true
  useSSL=false;
};

Search allowed only for a technical users

In this example, the user name is john.smith:

BonitaAuthentication-1 {
  com.sun.security.auth.module.LdapLoginModule sufficient
  userProvider="ldap://localhost:389/CN=Users,DC=MyDomain,DC=com"
  userFilter="(&(objectClass=user)(userPrincipalName={USERNAME}@mydomain.com))"
  tryFirstPass=true
  java.naming.security.principal="technical.user@mydomain.com"
  java.naming.security.credentials="technical_user_password"
  debug=true
  useSSL=false;
};

Other LDAP servers

Build the user DN using the user name

BonitaAuthentication-1 {
  com.sun.security.auth.module.LdapLoginModule sufficient
  userProvider="ldap://localhost:389"
  authIdentity="uid={USERNAME},ou=grenoble,dc=example,dc=com"
  debug=true
  useSSL=false;
};

Known limitations

The Active Directory configuration has been tested in single domain configuration. If you a running with multiple domains it’s likely that the user will have to type a username including domain name when logging in.

Troubleshooting

If necessary, you can edit your configuration to have additional logs (please note, a server restart will be required for the new configuration to be taken into account, though):

Enable JAAS debug mode by editing your JAAS configuration file (e.g. <TOMCAT_HOME>/server/conf/jaas.cfg) and adding the following line: debug=true
Enable java’s SSL/TLS connection debug mode by editing your application server’s environment setting file (e.g. <TOMCAT_HOME>/setup/tomcat-templates/setenv.sh(.bat)) and adding the following system property to the java options: -Djavax.net.debug=all

Common error examples

LDAP Authentication can’t find any LoginModule.

You see the following WARN message in your logs:

c.b.e.a.i.JAASGenericAuthenticationServiceImpl - error on context creation :javax.security.auth.login.LoginException: No LoginModules configured for BonitaAuthentication-1

Potential cause There are two potential causes:

The engine could not find the jaas (e.g. jaas-standard.cfg) configuration file where the LoginModule is defined.
The jaas configuration file does not contain any module named BonitaAuthentication-1.

Possible solution

Make sure the SECURITY_OPTS in the setenv.sh file has the correct file path to the jaas configuration file. (See Configure JAAS section)
Make sure the line in the setenv.sh(.bat) file defining the SECURITY_OPTS is uncommented AND the ${SECURITY_OPTS} / %SECURITY_OPTS% tag is added among the options in the line defining the CATALINA_OPTS. (See Configure JAAS section)
If you are starting Bonita using the start-bonita.sh(.bat) script, make sure you actually modify the file <BUNDLE_HOME>/setup/tomcat-templates/setenv.sh(.bat).
Make sure the definition of the LoginModules in your jaas configuration file respects the naming convention: the Bonita login context must be named BonitaAuthentication-<TENANT_ID> (where <TENANT_ID> is your tenant id). (See Login Context Name section)

LDAP Authentication fails to connect to LDAP server over SSL.

You see the following error in your logs:

Caused by: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed:sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target

Possible solutions

Make sure you have imported the public certificate of the LDAP server into the truststore being used by the application server.
Make sure the imported certificate has not expired.
Make sure the certificate has been imported into the correct truststore:
- Check whether your application is using a custom truststore. For example, if -Djavax.net.ssl.trustStore has been configured, it will override the location of the default truststore.
- Else, the default truststore of the JVM is used, namely (beware: you may have multiple JRE/JDKs): <JAVA_HOME>/jre/lib/security/cacerts (In order to add your SSL server’s certificate into this truststore, the default password is: changeit).
Check if your Anti-Virus tool has "SSL Scanning" blocking SSL/TLS. If it does, disable this feature or set exceptions for the target addresses.
Make sure that your LDAP server is indeed reachable at the SSL port. You may try connecting to the LDAPS URL with an external ldap client tool (e.g. ldapsearch).

LDAP Authentication fails to connect to LDAP server over SSL.

You see the following error in your logs (it may sometimes be necessary to have set the -Djavax.net.debug=all system property before hand):

javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: No subject alternative DNS name matching my.ldap.server found.

Cause The enpoint identification (i.e. hostname verification) check is failing to validate the LDAP server’s certificate because its subject does not match the hostname specified in the LDAPS url.

Possible solutions

Make sure the server name used in the ldaps:// address of the LdapLoginModule’s userProvider matches that of the LDAP server’s certificate.
Have the LDAP server use a certificate with a subject (or at least a subject alternative name) that matches the server’s domain name (so the one used in the ldaps:// addresse of the LdapLoginModule).
Disable the endpoint identification (note that the endpoint identification is enabled by default since java version 1.8.0_181) in Bonita’s application server by adding the following system property to the java options in your application server’s environment setting file (e.g. <TOMCAT_HOME>/setup/tomcat-templates/setenv.sh(.bat)): -Dcom.sun.jndi.ldap.object.disableEndpointIdentification=true

LDAP Authentication against Active Directory fails with invaild credentials error

The following stacktrace appears in the Bonita server log:

javax.security.auth.login.FailedLoginException: Cannot bind to LDAP server
at com.sun.security.auth.module.LdapLoginModule.attemptAuthentication(LdapLoginModule.java:817)
at com.sun.security.auth.module.LdapLoginModule.login(LdapLoginModule.java:565)
...
Caused by: javax.naming.AuthenticationException: [LDAP: error code 49 - 80090308: LdapErr: DSID-XXXXXXXX, comment: AcceptSecurityContext error, data YYY, vZZZZ..]

Cause As per LDAP standard, error code 49 means: "Invalid credentials" (i.e. the user credentials presented in the bind operation are not valid).
When connecting to Active Directory, this error may appear for multiple reasons. The AD-specific error code is the one (YYY) after "data" in the error message:

AD error code	Meaning
525	user not found
52e	invalid credentials
530	not permitted to logon at this time
531	not permitted to logon at this workstation
532	password expired
533	account disabled
701	account expired
773	user must reset password
775	user account locked

Possible solutions

52e: invalid credentials
LDAP: error code 49 - 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1.
This error code can have several root causes:
- The user doesn’t exist in AD: in the JAAS configuration, verify the user filter and validate it using a tool such as Apache Directory Studio.
- The username doesn’t include the domain name: in the JAAS configuration, make sure that the authIdentity value includes the domain name.
- The user password provided is not correct.
531: not permitted to logon at this workstation
LDAP: error code 49 - 80090308: LdapErr: DSID-0C090446, comment: AcceptSecurityContext error, data 531, v4563
This problem is related to the configuration of Workstation Restrictions in Microsoft Active Directory. This problem does not happen when Workstation Restrictions is disabled on Active Directory.
In order to get over the error, there seem to be two possible solutions (to be handled by your Active Directory administrator):
- Disable the workstations restrictions in AD
- Add the hostname of the Active Directory server to "userWorkstations" attribute. (Note: If it is an AD cluster, you need to add each AD server.)